Automatic chicken farming equipment in ordinary use, maintenance is a particularly important one. We know that chicken farms are very dirty. In ordinary times, it is also necessary to clean and maintain regularly. Today layer cage suppliers for you from the following several aspects of learning.
1, Each time after raising a batch of chickens, check the material line buckle and lifting system and other places of screw fastening again. Can also be chicken feed line motor shaft with butter maintenance. A few drops of vegetable oil can be put into the motor bucket to prevent rust.
2, If some automatic chicken farming equipment is a chain drive seeding type feeder to feed. Poultry farmers should often check whether the chain and sprocket is normal, whether there is loosening, rust and other signs. Only when the equipment performance is good, the work efficiency can achieve the desired effect.
3, Before starting the switch of chicken equipment, check whether there are obstacles on the track. If there are obstacles, it will lead to the phenomenon of running off the track of chicken equipment. Therefore, check carefully before starting the device every day and then start it. And the need to regularly check the blanking line control line switch and contact, check whether there is loose, to prevent poor contact.
4, The coordination between feeding machine parts in the laying cage system is controlled by quenching gear and chain. Therefore, it is necessary to ensure lubrication between the fire gear and the chain. Avoid parts damage caused by lack of lubrication.
5, Feed into the bin will produce a lot of dust. Sometimes the feeding mechanism can not start, because the photoelectric switch used to control the feeding stop mechanism is covered with dust, resulting in the feeding mechanism can not start. So it is necessary to clean the dust on the photoelectric switch regularly.
These are the 5 tips for maintaining your equipment that layer cage suppliers have shared with farms using automatic chicken cage systems.