The drinking fountains of automated poultry breeding equipment need to be effectively cleaned. Water is an important mineral for the normal life of chickens. In the normal operation of chicken breeding equipment, in order to avoid undesirable phenomena, it is not only necessary to add water to the chickens scientifically, but also to clean the water diversion system effectively and scientifically.
- Many people think it is troublesome to clean the water dispenser for chickens, so it is usually installed and used for a long time without cleaning, which causes the water dispenser to block and use it abnormally. This is incorrect behavior. In the water dispenser of the chicken breeding equipment, the discharged water is left in the water pipe, and several drinking spouts are opened in the water pipe section. The water is left in the drain to prevent it from spoiling and contaminating the drinking water system. For drinking water or drinking water, flushing pipes and water tanks should be used to prevent substances from accumulating in the drinking water system, leading to precipitation, deterioration and water pollution.
- In production practice, if foreign matter is found in the drinking fountain of the chicken breeding equipment, you can open the end of the pipe and let the other end of the high-pressure water pipe have a pressure water pipe with fast water flow, and use the high-pressure fast water to rinse the nipple and the drinking pipe. Foreign matter and sediment to clean the high-pressure water pipe. If there is a biofilm on the nipple of the water pipe, the biofilm can be removed with hydrogen peroxide.
- This method is often used to flush the pipes of chicken breeding equipment, which can prevent the formation of viscous and deteriorated foreign matter and the deposition of foreign matter in the water, thereby ensuring the cleanliness of drinking water. When cleaning the chicken breeding equipment, it is necessary to clean up all the excess feed on the feed line, especially the feed left in the trough, the corner of the conveyor chain and the hopper. When cleaning, use vacuum cleaners, drum fans, iron brushes, etc. In addition, the sawdust can be inserted under the feeding chain with an abrasive tool to allow the chain to run to remove fixed feeding residues.
The above is about the cleaning method of the automatic chicken drinking system of the chicken breeding equipment. I hope to deepen everyone’s understanding of the product. If you want to know more about this product, please browse other sections of this site.